• Smooth Rod

• 2x 420mm × 8mm smooth rod - must be "rolls on glass" straight
• 2x 406mm × 8mm smooth rod - must be "rolls on glass" straight
• 2x 350mm × 8mm smooth rod - must be "rolls on glass" straight
• These can be cut from 3x 1m lengths

• M8 Threaded rod

• 6x 370mm M8 threaded rod (frame triangles)
• 4x 294mm M8 threaded rod (front,back)
• 3x 440mm M8 threaded rod (top, Z base)
• 2x 210mm M8 threaded rod (Z axis)
• 1x 30mm M8 threaded rod (X idler)
• These can be cut from 6x 1m lengths

• M8 Fasteners

• 100x M8 nut
• 100x M8 washer

• M4 Fasteners

• 2x M4x20 screw (for mounting extruder to X carriage)
• 2x M4 nylock nut
• 2x M4 washer

• M3 Fasteners

• 20x M3x10 screw (3/ea for XYE motors, 4/ea for Z motors, couple spares)
• 3x M3x20 screw (endstop clamps)
• 15x M3x25 screw (6 for X carriage belt clamp, 4 for Z couplers, 2 for y belt tensioner, 1 for gregstruder hinge, couple spares)
• 8x M3x30 screw (4 for y belt clamp, 4 for bed)
• 2x M3x50 screw (gregstruder idler)
• 3x M3x10 grub screw (XYE pulleys, M3x8 will also work)
• 50x M3 nut (may as well get a box of 100)
• 50x M3 washer (may as well get a box of 100)

• M2.5 fasteners

• 6x M2.5x15 screw (endstop switches)
• 6x M2.5 washers
• 6x M2.5 nuts